Anping Changfeng filter material factory
Hebei Changfeng Filter Material Co., Ltd. One-stop solution for Filter production
Add to Cart
The filter end cap is mainly used to seal both ends of the filter material and support the filter material to effectively improve the bearing capacity of the filter material. Chang Feng has been specialized in metal filter end caps since 1996 with a wide range of existing molds for air filter end caps for the cartridge filter. We are able to advise customers on the best material proper thickness opt for.Welcome, where we can communicate with each other, learn from each other!
There are parts of specifications of filter caps we made for clients before for your reference. If you need other shapes, we could make customization.
| Open Round End Cap with Tri-Bolt Holes | ||
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner height | 0.54 | 13.716 |
| Outer height | 0.5 | 12.7 |
| Inner rim diameter | 6.75 | 171.45 |
| Open Round End Cap with Outer Lip | ||
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner diameter | 0.625 | 15.875 |
| Outer height | 0.368 | 9.3472 |
| Lip | 0.375 | 9.525 |
Filter covers are widely used for dust filter, air filter, oil filter, fuel filter, activated carbon filter cartridges.
·Pharmaceutical industry: pre filtration of various antibiotics and other pharmaceutical solutions
·Food and beverage industry: filtration of alcohol, mineral water and drinking water
·Petroleum Industry: oilfield water injection filtration
·Electronic industry: high purity water pre filtration
·Chemical industry: filtration of various organic solvents, acids and lyes
Metallurgical Industry: it is used for the filtration of hydraulic system of rolling mill and continuous caster and the filtration of various lubricating equipment.
1.25 years' experience in producing filter end caps.
2. Accurate size according to customer requirements
3. Ensure the filters have a longer life with excellent heat and chemical resistance.
4. Effectively improve the capacity of the filter material.
5. Various exist mold to save your cost.
6. Qualified raw materials with certifications to make the filter caps.
Materials: galvanized steel, stainless steel, fingerprint proof, copper / brass, etc
Thickness 0.30 mm to 3.00 mm
Outer diameter 20.00 mm to 1000 mm
Type on / off, with / without holes, customized
Delivery time according to customer requirements
Packaging plastic bag / piece or customized
