Anping Changfeng filter material factory
Hebei Changfeng Filter Material Co., Ltd. One-stop solution for Filter production
Add to Cart
Filter adhesive is mainly composed of epoxy and hardener. In order to improve some properties, toughening agent, diluent, accelerator, coupling agent and other auxiliary materials can be added to meet different uses. Because the epoxy adhesive bonding strength is high, the versatility is strong, once had “The universal glue”, “The big force glue”said, in aviation, aerospace, automobile, machinery, construction, chemical industry, light industry, electronics, electrical appliances and daily life and other fields have been widely used.
It is an elastomer, and the filter end cap is produced by casting. In this way, the iron end cap and rubber sealing ring of the air filter element are omitted, and it is the most ideal product for the production of pull-type air filter elements.
wo-component polyurethane adhesive for machine
component proportion ratio is 100:40
|
Two-component polyurethane adhesive for machine component proportion ratio is 100:40 | ||
| Material-A | Material-B | |
| Weight | Small barrel :25KG | 10KG |
| Big barrel :50KG | 20KG | |
| Physical nature | orange-red viscous liquid (color based on your request to configure) | brown-yellow liquid |
| viscosity | 800-1000MPa.S(25°C) | 25-50MPa.S(25°C) |
| density | 1.02g/ml | 1.02g/ml |
| package | Plastic bucket or Tin bucket | Plastic bucket ,Tin bucket, Plastic pots |
| storage | 1. Material-A and material-B can store up 3-6 months. | |
| 2. To appropriate indoor storage above 15°C | ||
1. Before using the glue every day, stir the glue A with a hand electric drill evenly, and shake the glue B.
2. Turn on the electric heating plate and adjust the temperature to 40-50 degrees. In winter, preheat glue A and B in a small container.
3. Wipe the mold with release agent.
4. Mix A and B glues in a ratio of 100:40, add 40% talc powder, and use a 2800 rpm motor to stir and mix the glue. The mixing time is determined by the amount of glue. Each 100 grams of glue is about 7-10 Second.
5. Pour the evenly mixed liquid into the mold, and then put the paper core to apply pressure.
6. Unmold after 10 minutes.
The special adhesive for two-component room temperature curing filter element has good adhesion to metal paper, etc., impact resistance, peel resistance and vibration fatigue resistance, as well as good wear resistance and oil resistance.
1. The storage period of AB material is 3-6 months.
2. It is advisable to store indoors above 15°C:
3. Packing in plastic barrels. A glue 50 kg, B glue 20 kg packaging
1. This product is generally stored in a dry room, and pay attention to waterproof, moisture-proof and sun-proof. The inner plug and outer cover must be covered to prevent the rubber from absorbing moisture in the air and affecting the use effect.
2. A/B styrofoam can be used normally at room temperature (25℃), if the temperature is too high or too low, it will affect the use effect. Cooling or warming must be done artificially.
3. The mold must be coated with a release agent before pouring the glue, and the glue can be poured after it is dry.
Packing specification: 100:40 double sets of PU glue, 70kg for each set, including 50kg for A glue and 20kg for B glue
1.Q:Can you provide free samples?
A:Sorry, Free samples are not available. But after you place the order, samples cost would be return. Which is "FREE" in some way.
2.Q:Can we have the company LOGO to be printed on the products?
A:Of course. Private Label is absolutely welcome.
3. Q: Can you give me a discount price?
A: It is depending on the volume. The larger the volume is, the more discount you can enjoy.
4.Q:How do you guarantee your quality ?
A: Our workers and technical employees are with many years experiences to ensure the products are good. After production finished,check will be made by quality inspector.
5. Q:How can you guarantee the quality of mass production is same with the sample sent to me before?
A: Our warehouse staff will leave another same sample in our company, with your company name marked on it, which our production will be based on.
6. Q: How can you deal with quality issues that customers feedback after receiving the goods?
A: We will follow below steps to solve the quality issues the may occur.
1) Customers take photos of unqualified goods and then our sales staff will send them to Quality Department to verify.
2) If the issue is confirmed, our sales staff will explain the root cause and take corrective actions in coming orders.
