Anping Changfeng filter material factory
Hebei Changfeng Filter Material Co., Ltd. One-stop solution for Filter production
Add to Cart
1. Product introduction
Two-component polyurethane adhesive for machine
component proportion ratio is 100:25
2. Parameter table
| density | 1.02g/ml | 1.02g/ml |
| package | Plastic bucket or Tin bucket | Plastic bucket ,Tin bucket, Plastic pots |
| storage | 1. Material-A and material-B can store up 3-6 months. | |
| 2. To appropriate indoor storage above 15°C | ||
| Product name | pu adhesive and glue for air filter / polyurethane resin / Brand polyurethane adhesive and pu glue for air filter /AB PU adhesive for air filter / PUadhesive filter glue for air filters | |
| EINECS No. | 231-545-4 | |
| Material | Polyuerthane / 100%Silicone | |
| Classification | Hot Melt Adhesives / Double Components Adhesives / Double Components Adhesives | |
| Main Raw Materia | Acrylic | |
| Usage | Fiber & Garment, Packing, Transportation, Woodworking | |
| Model Number | OEM | |
| Package Type | 50Kg drum or 200Kg drum | |
| Type | Two Component | |
| MF | C102H151039N31 / Mixture | |
| Keywords | pu glue for air filter end and cap | |
| Quality | Top-quality | |
| Item | Epoxy Grout | |
| Application | Paper | |
3. Product characteristics
Material-A:Small barrel :25KGBig barrel :50KG
orange-red viscous liquid (color based on your request to configure)
4. Technology
1.The material must be full rocked after each to the plastic injection machine plastic injection so that the A material mixing evenly.
1.Every time the plastic injection machine plastic injection A material must be full before the shaking in order to the material until
2.AB material proportioning ratio of A:B=100:25 or 4:1.28°C,you can start operation
3.Material temperature controlled 24°C-28°C appropriate then you can start operation.
PU Filter Mould PU filter element mold cabin filter hot melt glue Filter end cap